Experimental analysis of perfonbond shear connection between

steel and pre-stressed concrete

Xiaolong Hu*, Yun Lin and Qingyuan Wang

Structural design of newly developed temporary steel footbridges

Marcela Karmazínová, Pavel Simon and Jindrich J. Melcher

Application of high-tech bridge safety monitoring system on monitoring results

Chin-Kuo Huang*, Chung I. Yen, Wei F. Lee, Cheng-Hsing Chen and Ming-Cheng Chen

New Troja Bridge over Vltava River in Prague

Lukas Vrablik*, Jakub Ruzicka and Milan Sistek

Stage analysis for girder erection of single-pylon suspension bridge

Hyun-Sok Choi*, Sung-Ho Kim, Seo-Kyung Cho and Hyun-Moo Koh

Effects of supported member on the nonlinear parametric vibration of a cable

Ming-Hai Wei*, Yi-Qing Xiao, Hai-Tao Liu and Du-Jian Zou

Effects of thickness variations on the thermal elastoplastic behavior of annular discs

Yun-Che Wang*, Sergei Alexandrov and Yeau-Ren Jeng

The minimum and maximum elastic buckling strengths of

unbraced frames subjected to variable loading

Y. Zhuang and L. Xu*

The empirical corner stiffness for right-angle frames of rectangular and H-type Cross-sections

Young-Doo Kwon*, Soon-Bum Kwon, Hyuck-Moon Gil and Hee-Jeong Cho

Advances in BIM Technology for 3D Modeling and Meshing of

Axi-symmetrical Pressure Vessels for the Computation of Limit Load

José Ricardo Queiroz Franco* and Alexandre Balabram

Shape design of a sheet contour against concurrent criteria

Fatima-Zahra Oujebbour*, Rachid Ellaia, Abderrahmane Habbal and Ziheng Zhao

Plastic failure of locally supported silos with U-shaped longitudinal stiffeners

Arne Jansseune*, Wouter De Corte and Rudy Van Impe

Nonlinear bending analysis of laminated composite stiffened plates

S.N. Patel*

Finite element analysis on steel-concrete-steel sandwich composite beams

with J-hook shear connectors

Jia-bao Yan*, J.Y. Richard Liew, Min-hong Zhang and Zhenyu Huang

Numerical study on the moment capacity of zed-section purlins under uplift loading

Jue Zhu*, Jian-kang Chen and Chong Ren

Moment redistribution of continuous composite I-girders with high strength steel

Hyun Sung Joo*, Jiho Moon, Ik-Hyun Sung and Hak-Eun Lee

Structural behaviors of cold-formed steel channel members at elevated temperatures

Shanshan Cheng*, Boksun Kim and Long-yuan Li

Experimental and numerical analysis of corroded steel plates

subjected to compression buckling load

Lusman, Tatsuya Yokogawa, Mitao Ohga, Seiji Furukawa and Pang-jo Chun*

Study on drying shrinkage cracking characteristics of steel chip

reinforced cementitious composite

Sun-Hee Hong*, Shinya Kimura, Yuichi Sato and Yoshio Kaneko

Polypropylene fiber-based strain-hardening cementitious composites

Bang Yeon Lee*, Victor C. Li and Yun Yong Kim

Effect of fiber length on direct tensile and impact strength of

cement-based composites containing silica fume

An Cheng, Wei-Ting Lin*, Hui-Mi Hsu, Sao-Jeng Chao, Wei-Yuan Dai and Chih-Cheng Huang

Compressive behavior of hybrid FRP confined concrete columns

Li-Juan Li*, Shun-De Xu, Lan Zeng and Yong-Chang Guo

Bonding between high strength rebar and reactive powder concrete

Deng Zong-cai*, Jumbe R. Daud and Yuan Chang-xing

Hygrothermal effect on mechanical and

thermal transport properties of epoxy based nanocomposites

Suyoung Yu*, Seunghwa Yang and Maenghyo Cho

Influence of adhesive energy on debonding in

polymeric composites containing randomly located nanoparticles

B.J. Yang and H.K. Lee*

Effect of different crosslink densities on the thermomechanical properties of

polymer nanocomposites

Byungjo Kim*, Joonmyung Choi, Suyoung Yu, Seunghwa Yang and Maenghyo Cho

Crystallographic defect-induced interfacial strengthening of

carbon nanotube reinforced polymer composites

Seunghwa Yang*, Suyoung Yu, Joonmyung Choi and Maenghyo Cho

A study on the homogenization modeling

for thermal conductivity of polymer nanocomposites

Hyunseong Shin*, Seunghwa Yang, Seongmin Chang, Suyoung Yu and Maenghyo Cho

The TiNi wires appropriate for damping of stayed cables

in a standard and in extreme summer - winter temperature domain

F. Casciati, S. Casciati, V. Torra* and G. Carreras

Scaling law in fatigue tests of shape memory alloy specimens

Sara Casciati*

Thermomechanical characterization of an Fe-Mn-Si-Cr-Ni-VC shape memory alloy

for application in prestressed concrete structures

W.J. Lee*, B. Weber, G. Feltrin, M. Motavalli and C. Leinenbach

Variation of electric resistance of Cu-Al-Mn superelastic alloys under cyclic tension

Y. Araki*, K.C. Shrestha, M. Yamakawa, N. Yoshida, T. Omori, Y. Sutou and R. Kainuma

Diagnostics and seismic protection of a historical minaret using SMA devices

Karim Hamdaoui*, Zahira Benadla, Ikram Soussi and Hanane Fadia Barka

Three techniques for estimation of Instrumental Intensity: a comparison

Vladimir Sokolov*

Analysis of post-elastic damage measures in nonlinear dynamic analyses of RC structures

Cristina Cantagallo, Guido Camata and Enrico Spacone*

Long-period ground motion characterization by cross wavelet transform

Tsoggerel Tsamba* and Masato Motosaka

Seismic response evaluation of new wooden house by collapsing process analysis

Hayato Nishikawa* and Tomiya Takatani

Effect of column base flexibility on residual drift demands of

low-rise steel moment-resisting frames

low-rise steel moment-resisting frames

Microscopic and macroscopic points of view of gas hydrate formation

using in-situ Raman spectroscopy

Ju Dong Lee*, Sang Yeon Hong and SeungMin Lee

Effects of flow behavior on the design of transient operation scenarios

Jakyung Kim* and Yutaek Seo

Study of manifold backpressure estimation and

surge volume analysis for infield flowlines

Juneyoung Kim* and Yutaek Seo

Production availability for new subsea production systems with seabed storage tanks

Inhwan Choi*, Kwangpil Chang, Yutaek Seo and Daejun Chang

Subsea system reliability and risk management

Kwang-Pil Chang*, Sung-Tak Kim and Young-Hoon Kim

Moment increase of 3 storied building on floating concrete pontoon

according to incident wave angle

Young-Wook Lee*, Tae-Jun Park and Bo-Ram Kim

Experimental study of a floating structure connected by pre-stressing

Young-Wook Lee, Ji-Yong Chae* and Hyuk-Nyeon Kim

The seafloor deformation and well bore stability monitoring during

gas production in unconsolidated reservoirs

Joo Yong Lee*, Jong-Hwa Chun and Se Joon Kim

A new method of optimal sensor placement

for modal identification of offshore platform structure

Ling ling Lu*, Xi Wang and Chen Guang Huang

New direct search method for the discrete structural optimization with

nonlinear constraints and integer Index variables

Hongwoo Lee*

Structural modeling and design of tall buildings composed of

ultra-lightweight floor systems

Andi Asiz* and Danish Ahmed

Investigating structural behavior of outrigger-braced tall structures

Farshid Nouri* and Payam Ashtari

Innovative post-tensioned hybrid wind turbine tower made of

ultra high performance cementitious composites segment

Xiang-Guo Wu*, Jiang Yang and Issa Brown Mpalla

Estimation of randomness in aeroelastic loading affecting on the windinduced

response of a long-span bridge simulated by CFD

Dong-Woo Seo*, Byeong-Cheol Kim and Ki-Tae Park

Gradient enhanced plasticity in engineering applications

Somsak Swaddiwudhipong*, Zhishun Liu, Xu-Dong Qian and Leong-Hien Poh

Mechanical properties of silica aerogel – a molecular dynamics study

Jincheng Lei, Jianying Hu and Zhishun Liu*

Estimation of impact forces generated by storm debris

Nelson Lam* and Emad Gad

Evaluation of wind fragilities of existing multi-story shear frames

using maximum a posteriori estimation

Vincent Z. Wang*, John D. Ginger and David J. Henderson

Mechanical behavior of composite gel periodic structures

with the pattern transformation

Jianying Hu*, Yuhao He, Jincheng Lei, Zhishun Liu and Somsak Swaddiwudhipong

Fatigue assessment of highway bridges with k-type bracing system

Chung C. Fu*, Gengwen Zhao, Tim Saad, Yunfeng Zhang and Ed Zhou

Consideration of structural and wind concern

by B/D ratio in cable-stayed bridges adopting HSB800 with pi-shape

NakHyun Chun*, HyunSung Joo and HakEun Lee

Analysis and fire resistance design of concrete filled steel tube reinforced concrete columns

Lei Xu* and Yu-Bin Liu

Passive structural response control of unconventional under-deck cable-stayed bridges

Ieva Misiunaite* and Algirdas Juozapaitis

Seismic response estimation of steel buildings with deep columns and PMRF

Alfredo Reyes-Salazar*, Manuel E. Soto-López, José R. Gaxiola-Camacho,

Edén Bojórquez and Arturo Lopez-Barraza

Seismic response reduction due to viscous damping and

material yielding for 3D steel buildings with PMRF

Alfredo Reyes-Salazar*, Ramón E. Rodelo-López, Eden Bojórquez,

J. Luz Rivera-Salas, Juan I. Velazquez-Dimas and Achintya Haldar

Behavior of PSC structure using nonlinear tendon model

Yangsu Kwon* and Hyo-Gyoung Kwak

Behavior of RC elements subjected to tri-directional loads

Moheb Labib, Yashar Moslehy, T.R. Mullapudi and Ashraf Ayoub*

A nonlinear analysis of the shotcrete lining reinforced by steel bars using fiber section model

Jeong-Soo Kim* and Moon-Kyum Kim

Multiaxial interaction domains of R.C. sections derived through

a parametric subdomains discretization

Deborah Briccola, Elisa Conti, Pier Giorgio Malerba and Manuel Quagliaroli*

Effects of thermal and hygric gradients on the spalling of

high performance concrete subjected to elevated temperatures

Binsheng Zhang*, Martin Cullen and Tony Kilpatrick

A multiscale framework for lubrication analysis of bearings with textured surface

Leiming Gao*, Gregory de Boer and Rob Hewson

Length scale and strain rate dependent shear banding deformation

in nanoscale Cu/W multilayers

Yuan Li, Fei Wang*, Ping Huang and Ke-Wei Xu

Evaluation of bulk properties of structural materials from small-scale mechanical tests

Tae-Hong Ahn*, Chansun Shin, Heung Nam Han and Junhyun Kwon

Investigation of the performance of concrete samples with artificial permeable holes

Sheng Szu Peng*, Yan Ren Chen and Zhang Wei Lai

Reduction of bending vibrations of slender beam structures with

actuated piezoelectric patches and shunt circuits

Juergen Schoeftner* and Gerda Buchberger

Wireless sensor networks for monitoring and control of frame structures

Markus Zellhofer*, Albert Poetsch, Georg Moestl and Michael Krommer

SHM with wave diffraction patterns and probabilistic decision tree based multi-class SVM

Mechbal Nazih* and Uribe Juan Sebastian

Multiple crack detection of pipes using PZT-based guided waves

Shi Yan*, Ji Qi, Nai-Zhi Zhao, Yang Cheng and Sheng-Wenjun Qi

Frequency damage indicators for piezoelectric composites

Ayech Benjeddou*, Mohsen Hamdi and Samir Ghanmi

Seismic performance of the retrofitting method using the pin-ended doubly circular

hollow tube brace for existing reinforced concrete frames

Daisuke Matsumoto*, Eiichi Inai, Takanori Kawamoto, Ken Harayama,

Takuya Kakihara, Kazuaki Miyagawa and Wataru Kitamura

Seismic performance of the retrofitting method

by framed steel bracing system partially connected using joint anchors

Yuji Takahashi*, Eiichi Inai, Takanori Kawamoto, Ken Harayama and Takuya Kakihara

Comparative performance of RC shear walls designed by different standards

Farhad Dashti* and Rajesh P Dhakal

Effect of seismic sequences on the response of RC buildings located in soft soil sites

Jorge Ruiz-García*, Marco V. Marín and Amador Terán-Gilmore

Research on the reparability of structures based on post-earthquake residual deformation

Jian-Bing Hao*, Gang Wu and Zhi-Shen Wu

Parametric study of the behavior of concrete block quay walls, considering

near-field records, the case of Pars petrochemical port Pouya Madanipour*, Mahdi

Dehghanirenani and Hamid Zafarani

On the numerical simulation of structural pounding in three dimensions

Panayiotis Polycarpou and Petros Komodromos*

Damage estimation of expansion joint by collision between girders

Yukihide Kajita* and Takeshi Kitahara

Evaluation and mitigation of earthquake induced pounding effects on

adjacent buildings performance

Shehata E. Abdel Raheem

Seismic response control of benchmark building using viscoelastic dampers

B.R. Raut* and R.S. Jangid

Application of fluid damper controlled single bay steel buildings

Deh-Shiu Hsu*, Hien-Shing Tan and Yung-Feng Lee

Investigation of the validity of the shock absorber

using laminated fiber reinforced rubber for the PC girder bridge

Tomohisa Hamamoto*, Toshitaka Yamao and Takuro Moriyama

LQG design scheme for multiple vibration controllers

in a building–equipment system considering the maximum control force

Masayuki Kohiyama* and Minako Yoshida

Stability of eshelby dislocations in crystalline nanowire

Seunghwa Ryu* and Wei Cai

Size effect on dislocation nucleation in silicon nanowires

Keonwook Kang* and Wei Cai

Dynamic response and structural safety of a segmental precast

concrete box-girder bridge during construction

Fabio Biondini and Pier Giorgio Malerba*

Residual bearing capacity of riveted steel tiesdeformed by the swelling of interstitial rust

Pier Giorgio Malerba* and Luca Sgambi

Increasing of deflection of prestressed concrete structures

due to incorrect and harmful tendon layout

Lukas Vrablik*, Zdenek Matous and Vladimir Kristek

Concept design for enhanced ballistic protection driven by numerical simulations

Arash Ramezani*, Daniel Huber and Hendrik Rothe

Buckling analysis of structures subject to combined loading including acceleration forces

Wenjing Wang and Randy Gu*

Life-cycle cost analysis for nuclear power plants with seismic isolated system

Sunyong Kim*, Hong-Pyo Lee and Myung-Sug Jo

Report of three-dimensional laser scanning of the triple church complex in Jerash

Hitoshi Takanezawa*, Kenichiro Hidaka and Takashi Hara

Structural characteristics of ancient dome in Jerash

Takashi Hara*, Kenichiro Hidaka and Reiko Seta

Estimation of the dynamic behaviour of a heritage structure

Takashi Hara* and Kenichiro Hidaka

Study on structural dynamic behaviors of Hagia Sophia

through micro-tremor measurement

Kota Yamaoka*, Takashi Hara and Kenichiro Hidaka

Hysteretic model of steel connections for self-centering frames

based on experimental studies of angles

Arturo López-Barraza*, Sonia E. Ruiz, Alfredo Reyes-Salazar and Edén Bojórquez

Heat transfer analysis of hybrid stainless-carbon steel beam-column joints

Ali Razzazzadeh*, Zhong Tao and Tian-Yi Song

Punching shear behavior of steel-concrete composite decks with different shear connectors

Xiao-Qing Xu* and Yu-Qing Liu

Finite element method for stability analysis of tapered thin-walled beams under lateral loads

Masoumeh Soltani*, Behrouz Asgarian and Foudil Mohri

An experimental study on cyclic behaviour of extended

end-plate connections equipped with shape memory alloy bolts

Cheng Fang*, Michael C.H. Yam, Angus C.C. Lam and Chuanglong Jiang

Effect of the heat input in the mechanical and metallurgical properties of welds

on AHSS transformed induced plasticity steel joined with GMAW process

Victor-Lopez*, Arturo-Reyes and Patricia-Zambrano

Finite element method for stability and vibration analyses of

thin-walled beams with arbitrary cross-section

Masoumeh Soltani*, Behrouz Asgarian and Foudil Mohri

Effect of Fatigue Characteristics on Burring and Tapping of

Ultra High Strength TRIP Steel Sheet with Bainitic Ferrite Matrix

Akihiko Nagasaka,Shunsuke Moriya,Takahiro Nakazawa,

Koh-ichi Sugimoto,Toshio Murakami and Tomohiko Hojo

Stress-resultant based elasto-plastic analysis for a concrete plate

Jinsang Chung and Nam H. Kim*

Numerical approach to estimate liquid tightness of

outer concrete tank in emergency LNG spillage

Seung Hee Kwon*, Jeong Su Lee, Yun Lee, Ji-Hoon Kim and Chan Kyu Park

Application of response surface methodology:

Optimum mix design of concrete with slag as coarse aggregate

Rhea E. Regulacion* and Andres Winston C. Oreta

An improved Thomas Algorithm for finite element matrix parallel computing

Qingfeng Du, Zonglin Li*, Hongmei Zhang, Xilin Lu, Liu Zhang

Nonlinear analysis of RC shear walls by vector form intrinsic finite element method

Hongmei Zhang, Song Liu*, Yuanfeng Duan and Qingfeng Du

Parametric Portland: Customized parametric workflows for

reinforced concrete design and construction

Keyan Rahimzadeh*,Tristan Al-Haddad and Jamie O’Kelley

Simulations of computational fluid dynamics (CFD)

for the prediction of fibre orientation in SFRSCC

Aimar Orbe*, Jesús Cuadrado, Ramón Losada and Eduardo Rojí

Incremental dynamic analysis of frame-infill Interaction

for a non-ductile structure with nonlinear shear model

Aslam Faqeer Mohammad, Marco Faggella, Rosario Gigliotti and Enrico Spacone*

Generalized finite element analysis using the preconditioned conjugate gradient method

Dae-Jin Kim*, C. Armando Duarte and Young Hak Lee

Analysis of correlation between the void distribution and the mechanical property of

lightweight aggregates

Sang-Yeop Chung* and Tong-Seok Han

A large scale tsunami run-up simulation and numerical evaluation of

fluid force during tsunami by using a particle method

Mitsuteru Asai*, Shoichi Tanabe and Masaharu Isshiki

3-D transient analysis of elastic wave scattering by a crack

using a convolution quadrature based boundary element method

Takahiro Saitoh*, Akira Furukawa and Sohichi Hirose

Numerical simulation of nonlinear ultrasonic waves

for bi-material interface evaluation

Sohichi Hirose*, Taizo Maruyama and Takahiro Saitoh

Convolution quadrature time-domain boundary element method for

3-D wave propagation in fluid-saturated porous media

Fumika Chikazawa*, Takahiro Saitoh and Sohichi Hirose

Accelerated ultrasonic imaging technique by GPGPU

for nondestructive testing of structural concrete components

Kazuyuki Nakahata* and Sohichi Hirose

Development of a particle difference scheme for dynamic crack propagation problem

Young-Choel Yoon* and Kyeong-Hwan Kim

Vibration based health monitoring of joints in a continuous beam structure

Joy Pal* and Sauvik Banerjee

Movement assessment of a cable-stayed bridge tower

based on integrated GPS and accelerometer observations

Mosbeh R. Kaloop*, Mohamed A. Sayed and Dookie Kim

Application of support vector machine in health monitoring of plate structures

Satish Satpal*, Yogesh Khandare, Sauvik Banerjee and Anirban Guha

Structural integrity assessment of bridges using ambient vibration data

Jong-Jae Lee*, Se-Hoon Kim, Un-Jin Na, Won-Tae Lee and Chang-Geun Lee

Sensor placement method for damage identification

Juan Wang* and Qing-Shan Yang

Kalman filter based data fusion

for dynamic displacement estimation using LDV and LiDAR

Kiyoung Kim*, Junhee Kim and Hoon Sohn

Study of pattern of sensor installation for analysis behavior of

offshore jacket structure

Abbas Joorabchian* and Ali Akbar Golafshani

Optimum structural configuration of irregular buildings 1. Elastic systems

G. Georgoussis*, A. Tsompanos, T. Makarios and A. Papalou

Nonlinear seismic assessment of eight-storey reinforced

concrete building according to Eurocode EN 1998-3

V. Lekidis*, S. Anagnostopoulos, D. Baros, Ch. Karakostas, Th. Salonikios and T. Makarios

Optimum structural configuration of irregular buildings 2. Inelastic systems

G. Georgoussis*, A. Tsompanos, T. Makarios and A. Papalou

Influence of masonry infills in torsional irregular RC buildings

Part 1: Modeling of infills

Theodoros Fotakopoulos, Georgios Mousafeiropoulos,

Marina L. Moretti* and Triantafyllos K. Makarios

Torsional-translational behavior of irregular wind energy structures

Triantafyllos Makarios* and Charalambos Baniotopoulos

Influence of masonry infills in torsional irregular RC buildings

Part 2: Analysis and results according to the Eurocodes

Marina L. Moretti*, Georgios Mousafiropoulos,

Theodoros Fotakopoulos, and Triantafyllos K. Makarios

The maximum corner displacement magnification of one-storey eccentric systems

Michele Palermo, Giada Gasparini*, Stefano Silvestri and Tomaso Trombetti

Special precast beam-column connection using pure dry cast method

Thomas H.-K. Kang*and Dong Joo Lee

Improved earthquake-resistant design methods of shallow coupling beams

Myoungsu Shin*, Seong-Woo Gwon, Kihak Lee and Sang Whan Han

Seismic performance of hollow reinforced concrete columns

under cyclic pure torsional loading

Masahiro Hattori* and Hisanori Otsuka

Seismic damage evaluation of existing low-rise RC buildings Suffered

by the 2011 off the Pacific Coast of Tohoku Earthquake

Takayuki SANO*, Akira YASOJIMA and Toshiyuki KANAKUBO

Optimal placement of hysteretic dampers via adaptive smoothing algorithm

Yu Murakami*, Katsuya Noshi, Kohei Fujita,Masaaki Tsuji and Izuru Takewaki

Control of vibrations of two metallic structures produced and designed in Portugal –

Cantilever highway sign support and Tall lattice wind tower

Fábio Paiva Jorge Henriques and Rui C. Barros*

Performance appraisal of retrofit RC frames subjected to dynamic loading conditions

Suresh Babu S.* and Gobinath S.

Numerical modeling of shock generation and propagation during satellite separation

Marshal Deep Kafle*, Dae-Oen Lee, Juho Lee, Jae-Hung Han and Sung-Hyun Woo

Minimum slab thickness of RC slab to prevent undesirable floor vibration

Mohammad Rakibul Islam Khan, Zafrul Hakim Khan*,

Mohammad Fahim Raiyan and Khan Mahmud Amanat

Resonant behavior of railway track having random sleeper spacing

Kazuhisa Abe, Sodbilig Batjargal* and Kazuhiro Koro

Identification of time-varying structures using TVAR and

TVARV model based on B-spline wavelet

J. Zhang, Z.Y. Shi* and S.W. Ning

Numerical simulation of projectile penetrating concrete target

using SPH-Lagrange coupled method

X. Pang* and H.J. Du

Seismic performance and effect of curved geometry

on isolation system in horizontally curved bridge

Nitin P. Kataria* and R.S. Jangid

Pinning seismic retrofit of masonry constructions with application of

polymer-cement pastes as bonding agents

Yoshikazu Araki, Kshitij C. Shrestha*, Yusuke Suzuki and Sanjay Pareek

The mechanical behavior and buckling failure of

sharp-notched SUS 304 stainless steel tubes subjected to pure bending creep

Kuo-Long Lee* and Wen-Fung Pan*

Buckling patterns of hydrostatically pressurized multiwalled carbon

nanotubes embedded in an elastic medium

Motohiro Sato*, Ayako Kusano and Hiroyuki Shima

Pushover analysis of reinforced concrete structures with

coupled shear wall and moment frame

Yungon Kim*

A novel algorithm for solving MDOF systems with clearances

Nenad Kranjcevic, Milenko Stegic and Nikola Vrankovic*

Nonlocal plasticity and damage

Francesco Marotti de Sciarra*

Effective length of RC column with spandrel wall

Eun-Lim Baek*, Sang-Hoon Oh and Sang-Ho Lee

The elastoplastic Cosserat continuum model and numerical simulation of

strain localization

Hong-xiang Tang* and Zhao-long Hu

Post failure localization instabilities in chemically active creeping faults:

steady-state bifurcation and transient analysis

Sotirios Alevizos*, Emmanuil Veveakis and Yannis F. Dafalias

Energy dissipation of steel-polymer composite beam-column connector

Yun-Che Wang* and Chih-Chin Ko

Natural frequency of a composite girder with corrugated steel web

Jiho Moon*, Hee-Jung Ko, Ik Hyun Sung and Hak-Eun Lee

Experiments on prestressed steel-concrete composite girders with

corrugated webs

Lee Deuck Hang, Oh Jae Yuel*, Kang Hyun, Kim Kang Su, Kim Hyung-Jun and Kim Heung-Youl

Experimental study on half-pipe shear connectors under direct shear

Kojiro Uenaka* and Hiroshi Higashiyama

Behaviour of concrete-filled steel tubular column to

restrained steel beam joints after exposed to full-range fire

Tian-Yi Song*, Lin-Hai Han and Zhong Tao

Parameter study on the long-term deformation of concrete columns

Gyeong-Hee An and Jin-Keun Kim*

Advanced construction stage analysis of

high-rise building considering creep and shrinkage of concrete

Taehun Ha* and Sungho Lee

KCI database of test data for creep and shrinkage of concrete

Seung Hee Kwon*, Goangseup Zi and Na Young Kim

Investigation of concrete cracking due to hydration heat of

reactor containment building in hot and cold weather

Yun Lee*, Ki Min Lee, Yun Yong Kim and Jung Hwan Hyun

Effective visualization of local vibration data collected over

large infrastructure elements

Tae-keun Oh* and John. S. Popovics

Numerical analysis-based study for fire resistance capacity of RC bridge

with standard time-temperature curves

Cheolwoo Park*, Sang-Gil Seo, Jin-Min Jeong, Jae-Won Shim,Ji-Hyun Oh* and Minkwan Ju

Choice of discrete element simulation contact model parameter to

reproduce laboratory surface avalanche

Fu-Ling Yang, Chuin-Shan Chen*, Wei-Tze Chang and Shang-Hsien Hsieh

The erosion in a model of dam-break shear flows

Ya-Ting Huang and Yih-Chin Tai*

Vorticity-induced lateral force mechanism and onset of

local flow instability in quicksand

Shin-Ruei Lin*, Chuin-Shan Chen, Fuling-Yang and Shang-Hsien Hsieh

Stress state analysis on a rock anchor RC foundation of wind driven generator

Shi Yan*, Bi-Cheng Song, Wei Sun, Han Yan and Qi-Le Yu

Optimal sensor placement for Canton Tower using virus monkey algorithm

Ting-Hua Yi*, Hong-Nan Li and Xu-Dong Zhang

Design and applications of fiber Bragg grating sensors for structural health monitoring

H.N. Li*, L. Ren, D.S. Li and T.H. Yi

Implementation of structural health monitoring to a real large span

steel roof and analysis on its stress identification

Jun Teng*, Wei Lu and Fengqi Wu

Health condition evaluation of cable-stayed bridge driven by

dissimilarity measures of grouped cable forces

Dan-Hui Dan*, Yi-Ming Zhao, Tong Yang and Xing-Fei Yan

Seismic fragility curve development by coupling FERUM and ZEUS-NL

Young-Joo Lee* and Do-Soo Moon

On the modeling of ground-motion field for seismic loss assessment of

urban areas and lifelines for regions with a lack of strong-motion data

Vladimir Sokolov* and Friedemann Wenzel

Seismic regionalization based on an artificial neural network

Jaime García-Pérez* and René Riaño

Estimation of liquefaction and layers using Hachinohe geotechnical information database

Yutaka Hashizume*, Shigeaki Nozoe and Kenji Kaneko

Experimental study on the seismic performance of

suspended ceiling systems in interaction with partition Walls

Wen-Chun Huang*, Ghyslaine McClure and Nahidah Hussainzada

Conceptual design of 5MW floating wind turbines for Korean offshore

Sung Youn Boo*, Jun Zou and SW Im

Buffeting response of ultimate loaded NREL 5 MW wind turbine blade

using 3-dimensional CFD

Byeong-Cheol Kim* and Youn-Ju Jeong

On the flexible support system of the floating axis wind turbine

Hiromichi Akimoto*, Jong-Chun Park, Se-min Jeong, Hee-Su Lee and Kenji Tanaka

Numerical analysis of hybrid substructure with multi-cylinders for wind turbines

Min-Su Park*, Youn-Ju Jeong and Young-Jun You

Influence of failed blade pitch control system to FOWT by

aero-elastic-control-floater-mooring coupled dynamic analysis

Yoon Hyeok Bae* and Moo-Hyun Kim

Evaluation of the thermally damaged concrete using nonlinear ultrasonic

Hong Jae Yim, Jae Hong Kim and Hyo-Gyoung Kwak*

Identification of delamination damages in

concrete structures using impact response of delaminated concrete section

Sung Woo Shin*, Taekeun Oh and John S. Popovics

A study on nonlinear resonance frequency shift of fire-damaged concrete

Sun-Jong Park, Hong Jae Yim and Hyo-Gyung Kwak*

Application of ultrasonic wave reflection for setting and stiffening of cement paste

Chul-Woo Chung*, John S. Popovics and Leslie J. Struble

Experimental study on flexural behaviour of self compacting steel fibre concrete

Adams Joe M.*,Kanmalai Williams and Shrinath Rao K.

Finite cylindrical prism methods for the analysis of laminated composite hollow cylinders

Chih-Ping Wu* and Hao-Yuan Li

Dynamic behavior of crumb rubber concrete subjected to repeated impacts

Feng Liu, Gui-Xuan Chen and Li-Juan Li*

Failure process of carbon fiber composites

Alexander Tesar*

Comparative Study of Mechanical Performance of Bamboo Joints

Yu-Guang Fu*, Ben-Shun Shao and Shen-Chao Fu

Effect of variation in microstructure on

high temperature creep Fe-Ni-Cr superalloy

Esah Hamzah*, Maureen Mudang and Muhammad Adil Khattak

Effect of plastic anisotropy on the limit load of highly under-matched joints:

a conceptual approach to plane strain problems

Sergei Alexandrov*, Yusof Mustafa and Mohd Zamani Ahmad

Brittle fracture on crack initiation beneath bearing surface of layered substrate

Y.J. Xie* and X.H. Wang

Y.J. Xie* and X.H. Wang

closed-cell aluminum alloy foams with computed tomography

J. Zhang and G.P. Zhao*

Structural response of timber-concrete composite beams

predicted by finite element models and manual calculations

Nima Khorsandnia*, Hamid R. Valipour and Keith Crews

Finite element analysis of pedestrian-floor dynamic interaction

including human participation

Jingwei Qin*, Qingshan Yang and Siu Seong Law

Investigation of interfacial crack energy release rates and

deformation characteristics of damaged Glare under uni-axial tension

Sunil Bhat* and S. Narayanan

Analysis of behaviour for concrete-filled steel tubular beams

Audronis Kazimieras Kvedaras*, Gintas Šaučiuvėnas, Arūnas Komka and Ela Jarmolajeva

Fracture behavior of prototype steel-GRP (hybrid) riser under internal fluid pressure

Vishwesh Dikshit* and Ong Lin Seng

Finite element analysis of curved lightweight steel-concrete-steel

sandwich panel subjected to lateral loads

Zhenyu Huang*, J.Y. Richard Liew, Jiabao Yan and Junyan Wang

Finite element analysis on concrete-encased CFST stub columns

Yu-Feng An*, Lin-Hai Han and Xiao-Ling Zhao

Behavior of Concrete Filled Steel Tubular (CFST) triple-limb laced columns

subjected to ISO 834 standard fire

Z.Q. Cui*, L.H. Han and T.Y. Song

FEA modelling of curved concrete filled steel tubular (CCFST) trusses

subjected to bending

Wu Xu*, Lin-Hai Han and Zhong Tao

Effect of slabs on the seismic response of a three dimensional wall-type building structure

Han Seon Lee* and Kyung Ran Hwang

Effect of beam dimensions on structural performance of wide beam-column joints

J.S. Kuang and Wing Shan Kam*

Continuous hoops for transverse reinforcement of reinforced concrete columns

Tae-Sung Eom*, Hong-Gun Park, Su-Min Kang, Jong-Min Jin and Hyoung-Bum Ahn

Seismic design considerations about architectural design aspects and irregularities

Serra Zerrin Korkmaz* and Hasan Husnu Korkmaz

A criterion to minimize FE mesh-dependency in

reinforced concrete structure subjected to impact loading

Hyo-Gyung Kwak* and HanGul Gang

Reliability assessment of double-wall containment under missile impact

Baha M.A. Khateeb*, Nadeem A. Siddiqui, Tarek H. Almusallam and Husain Abbas

Active control of damaged composite structure for the recovery of

dynamic characteristics

Jung Woo Sohn* and Heung Soo Kim

A multiscale bridging model for piezeoelctric ZnO nanowires using

first principles calculation and continuum theory

Jin-Myoung Lim*, Janghyuk Moon, Kyeongjae Cho and Maenghyo Cho

On the surface effect formulation for nonlocal elasticity

Jun-Sik Kim*

Photo isomerization probability calculation of azo-benzene

Maenhyo Cho and Jung-Hoon Yun*

Study on directional preference of crack propagation

Hayoung Chung* and Maenghyo Cho

Development of a wireless cable tension monitoring system using smart sensors

Sung-Han Sim*, Jian Li, Hongki Jo, Jong-Woong Park and Billie F. Spencer, Jr.

Comparison of structural health monitoring systems on

the Hwamyung bridge

Marco Torbol*, Sehwan Kim, Jeong-Tae Kim and Masanobu Shinozuka

Long-term monitoring of the Hwamyung cable-stayed bridge using wireless sensor network

Khac-Duy Nguyen*, Jeong-Tae Kim, Sung Woo Shin, Chung-Bang Yun and Masanobu Shinozuka

DEEP (Displacement Estimation Error Back-Propagation) method for

cascaded ViSPs (Visually Servoed Paired Structured Light Systems)

Haemin Jeon, Jae-Uk Shin, Wanchoel Myeong, Youngjai Kim and Hyun Myung*

Dynamic stress monitoring system for stay cables using piezoelectric strain sensors

Khac-Duy Nguyen*, Thanh-Canh Huynh, Jeong-Tae Kim and Young-Hwan Park

Damage identification using damage-induced inter-story deflection for high-rise building

Hoyeon Jung, Seunghun Sung, Kiyoung Koo and Hyung-Jo Jung*

Simplified model of isolated nuclear power plant for seismic analysis

Seung-Hyun Eem* and Hyung-Jo Jung

Experimental studies of guided wave damage identification in

beams using a probabilistic approach

Ching-Tai Ng*

The achievable limits of operational modal analysis

Siu-Kui Au*

System identification of high-rise buildings using shear-bending model and ARX model:

Experimental investigation

Kohei Fujita*, Ayumi Ikeda, Minami Shirono and Izuru Takewaki

A surrogate model for a type of nonlinear hysteretic system with

application to wind response analysis

Vincent Z. Wang*, John D. Ginger and David J. Henderson

Identification of the degradation of railway ballast under a concrete sleeper

Qin Hu* and Heung Fai Lam

Experimental study on the hydrodynamic behaviors of two concentric cylinders

Jeong-Rok Kim*, Hyeok-Jun Koh, Won-Sun Ruy and Il-Hyoung Cho

A study of internal wave influence on OTEC systems

Shan Shi*, Nishu V Kurup, John Halkyard and Lei Jiang

Performance-based engineering approach for sustainable building design in Singapore

Hyerin Lee* and Khalid M. Mosalam

Movement identification model of a steel structure based on

structural health monitoring system

Mosbeh R. Kaloop*, Eunsung Kim, Mohamed A. Sayed and Dookie Kim

Transient MR fluid flows in valve mode using a non-convex constitutive relation

Cheng Zhang, Zhangwei Chen and Linxiang Wang*

Simulation study of magnetorheological testing cell design

by incorporating all basic operating modes

Mohd J. Mughni*, Saiful A. Mazlan, Hairi Zamzuri and Izyan M. Yazid

Increasing effective region in magnetorheological valve using

serpentine flux path method

Abdul Y. Abd Fatah*, Saiful A. Mazlan, Tsuyoshi Koga and Hairi Zamzuri

Magnetic Circuit Optimization in Designing Magnetorheological Damper

Izyan M. Yazid*, Saiful A. Mazlan, Takehito Kikuchi and Hairi Zamzuri

Optimal truss span study for the buckling restrained knee brace truss moment frame

T.Y. Yang* and Yuanjie Li

The development of a broadband smart skin antenna structure

Fei Peng* and Zonghong Xie

Finite element analysis of ground modification techniques for

improved stability of geotubes reinforced reclamation embankments subjected to scouring

Hyeong-Joo Kim, Jay Jamin* and Jose Leo Mission

A study on the behavior of dredged soil stratified in a transparent geobag

Hyeong-Joo Kim, Jay Jamin*, Myoung-Soo Won, Hyun-Jong Sung and Jang-Baek Lee

Physico-chemical characterization of fly ash

Januarti Jaya Ekaputri*, Triwulan, Khorin Agus Priadana, Tri Eddy Susanto and Subaer Junaedi

A thermal conductivity estimation model applicable to Korean weathered granite soils

Gyu-Hyun Go, Seung-Rae Lee, Young-Sang Kim, Min-Jun Kim* and Seok Yoon

The empirical correlation using linear regression of compression index for surabaya soft soil

Putu Tantri Kumala Sari* and Yerry Kahaditu Firmansyah

Ultimate bearing capacity of conical shell foundation

J.E. Colmenares, So-Ra Kang, Young-Jin Shin and Jong-Ho Shin*

A general criterion for geomechanics : extension to jointed rocks masses

Siegfried Ma¨ıolino

A study on nonlinear dynamic properties of soils

Chih Hao Hsu*, Shuh Gi Chern and Howard Hwang

Artificial Neural Network (ANN) application for

spatial interpolation of Standard Penetration Test (SPT) and soil profile data

Jose Leo Mission*, Hyeong-Joo Kim and Kwang-Hyung Lee

Validation of carbon emission intensity in

precast concrete structure using hybrid life cycle assessment

Wan Mohd Sabki Wan Omar, Jeung-Hwan Doh* and Kriengsak Panuwatwanich

Fiber reinforced lightweight binder with calcined-Sidoarjo mud

Triwulan*, Januarti Jaya Ekaputri and Pertiwi Megahsari

Experimental research on bond performance between GFRP bar and

concrete under single-ended pullout conditions

Li Sun* and Meizhen Zhang

Numerical modelling of steel fibre reinforced concrete beams subjected to fatigue loading

Ahsan Parvez* and Stephen James Foster

Experimental and numerical study of a lightweight steel-concrete bridge deck concept

Peter Helincks*, Wouter De Corte, Veerle Boel and Geert De Schutter

Ballistic behavior of steel sheets subjected to impact and perforation

T. Jankowiak*, K.M. Kpenyigba, R. Pesci and A. Rusinek

Analytical investigation of a new Through-Column-Type Joint for

composite reinforced concrete and steel frames

Seyed Rasoul Mirghaderi and Nasrin Bakhshayesh Eghbali*

Experimental stiffness verification of composite beams

Vincent Kvočák* and Daniel Dubecký

Research on concrete-filled steel tube columns subjected to cyclic lateral force

Peng Qin* and Yan Xiao

Sustainable composite beam behaviour with deconstructable bolted shear connectors

Sing-Siu Michael Lee* and Mark Andrew Bradford

Experimental study of aseismic performance of Recycled concrete filled steel tubular columns

Feng Liu, Yin-Yin Yu, Li-Juan Li* and Lan Zeng

Viability and performance of demountable composite connectors

Muiris C. Moynihan* and Julian M. Allwood

Analytical tension stiffening model of inoxydable steel in comparison with carbon steel

S. Alih, A. Khelil* and H. Fares

Production of synthetic lightweight aggregates using sand wash fines and

other waste materials for masonry

Saud Al-Otaibi*, Suad Al-Bahar, Sharifa Al-Fadala,

Ali Abduljaleel, Fatma Al-Fahad and Mahmoud Taha

Modeling of the compressive strength development for Alkali Activated Slag (AAS) concrete

Sang-Hyuk Oh*, Seong-Hyun Hong and Kwang-Myong Lee

Seismic resistance of cast-in-place concrete-filled hollow PC columns with

various tie configurations

Hong-Gun Park, Chang-Soo Kim*, Woo-Young Lim and Jung-Keun Oh

Shrinkage characteristics of alkali activated slag mortar with super-absorbent polymer

Sungwoo Oh*, Young Cheol Choi and Sang Hwa Jung

Creep and shrinkage of ultra lightweight cement composite

Kok-Seng Chia, Xue-Mei Liu, Jat-Yuen Richard Liew and Min-Hong Zhang*

Effects of curing conditions on carbonation of concrete containing expansive admixture

Sha Ding*, Zhonghe Shui, Teng Pan, Wei Chen and Wenbing Xu

Fracture toughness of high performance concrete subjected to elevated temperatures:

the effects of heating temperatures and testing conditions (hot and cold)

Binsheng Zhang*, Martin Cullen and Tony Kilpatrick

Mitigation of shrinkage of ultra high strength concrete by internal curing

Joo-Hyung Kim*, Young-Cheol Choi, Sang-Hwa Jung and Kwang-Myong Lee

Effect of phase interactions on crystal stress evolution under elastoplastic deformation

Tong-Seok Han*

A study on the design guideline of SMA spring with

the initial curvature added bi-stable composite

Jong-Gu Lee*, Junghyun Ryu, Seung-Won Kim, Kyu-Jin, Cho and Maenghyo Cho

Sensitivity analysis of nonlinear response of

buildings subjected to an adjacent un-braced excavation via fully coupled FEM

Hamid Zolghadr Jahromi*, Lidija Zdravkovic and Bassam A. Izzuddin

Multiscale simulation of adiabatic shear bands initiation and propagation under impact loading

Rongpeng Xu, Xiangguo Zeng and Jun Chen*

Molecular dynamics studies of interaction between hydrogen and carbon nano-carriers

Yun-Che Wang*, Chun-Yi Wu, Chi Chen and Ding-Shen Yang

A simplified model of caisson system for stability monitoring

So-Young Lee, Thanh-Canh Huynh, Jeong-Tae Kim* and Sang-Hun Han

Numerical simulation of rock berm under anchor collision

Jinho Woo*, Won-Bae Na and Jeong-Seok Yu

Damage detection in top-tensioned risers using modal parameters

Cheon-Hong Min*, Sup Hong, Hyung-Woo Kim, Tae-Kyeong Yeu and Jong-Su Choi

Long-term strain measurement on a jacket-type offshore structure

and neural networks based prediction model

*Jin-Hak Yi, Jin-Soon Park and Kwang-Soo Lee

Soundness Evaluation of Underwater Concrete Structures based on the Combination of

Rebound Hardness and Ultrasonic Pulse Velocity Methods

Sang-Hun Han, EunSeok Shin and Seunghee Park

Seismic Retrofitting Methods for Bearing Wall-type Structures

Constructed by Using Tunnel-form

Tae-won Park*, Chang-gil Joo, Lan Chung, Sang-hyun Lee and Ju-yeon Han

Cyclic behavior of steel tube-double steel plate-concrete composite walls

Xiaodong Ji*, Feiming Jiang and Jiaru Qian

Foundation uplift of a single-span bridge subjected to

simultaneous strong horizontal and vertical ground motion

Yuanzhi Chen, Tam Larkin* and Nawawi Chouw

Effect of number of loading cycles on seismic behavior of

steel tube-reinforced concrete composite columns

Mingliang Zhang*, Xiaodong Ji, Hongzhen Kang and Jiaru Qian

Field cyclic loading test of a 3-story non-seismically

designed existing concrete frame structure in Korea

Ji-Eun Roh*, Sang-Hyun Lee, Tae-Won Park, Seung-Ho Cho and Lan Chung

Approximated gradient based seismic control of

3D irregular buildings using multiple tuned-mass-dampers

Yael Daniel and Oren Lavan*

A modal displacement based approach for the seismic design of

one way asymmetric multi story buildings

Philip J. Wilkinson and Oren Lavan*

Dynamic response and design of the substructures for

a spar-type floating offshore wind turbine

Baowei Wang, E-Jae Choi, Changwan Ha, Sajad Rahmdel and Seonghun Park*

Design of spar-type floating substructures for

a 2.5 MW-class wind turbine using fluid-structure coupled analysis

Seonghun Park, E-Jae Choi*, Baowei Wang, Hanjong Kim and Ki-Suk Kwak

Study of the damage monitoring system on wind turbine blades

Daejhoong Yun and HeeChang Lim*

A new numerical modelling for 3D mooring cable fastening a spherical buoy

Xiangqian Zhu, Kun Woo Kim and Wan Suk Yoo*

Multi-body dynamic analysis of offshore wind turbine using Recurdyn

Dae-Guen Lim*, Min-Hyung Cho and Wan-Suk Yoo

Dynamic responses of floating platform for

spar-type offshore wind turbine: numerical and experimental

Jin-Rae Cho*, Yang-Uk Cho, Weui-Bong Jeong, Sin-Pyo Hong and Ho-Hwan Chun

Capacity of suction caisson anchors based on small scale experiments

Jaehun Ahn*, Bertrand Teodosio and Yusuk Kim

Control of surge and pitch motions of

a rectangular floating body using internal sloshing phenomena

Minho Ha and Cheolung Cheong*

Aerodynamic design of 2.5 MW horizontal wind turbine blade

in combination with CFD analysis

Seul-Ki Yeom*, Tae-Jin Kang* and Warn-Gyu Park

CFD simulation of vortex-Induced vibration with change in cylinder array

Tae-Jin Kang and Warn-Gyu Park*